At our institute, we are using a NI X2954R USRP. In the Skydel manual’s hardware selection section, this device is listed as supported. However, on the drivers page (https://users.skydelsolutions.com/drivers-and-firmwares/), there are only FPGA drivers for X300, X310 and N310. Which firmware can be used for the X295 USRP?
1 Like
Hello,
The NI USRP-295xR all have the same FPGA as the Ettus X310 SDR.
This means you MUST use the FPGA image for Ettus X310 SDR.
Let us know if you need more details.
4 Likes