# GNSSource-2500 & iSyncMgr

**URL:** <https://learn.safran-navigation-timing.com/t/gnssource-2500-isyncmgr/1216>\
**Category:** Skydel Discussion\
**Created:** [March 13, 2024, 12:49pm UTC](https://learn.safran-navigation-timing.com/t/gnssource-2500-isyncmgr/1216 "2024-03-13T12:49:43Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![j\_amghar](https://avatars.discourse-cdn.com/v4/letter/j/ba9def/32.png) [@j\_amghar](https://learn.safran-navigation-timing.com/u/j_amghar)\
**Post date:** [March 13, 2024, 12:49pm UTC](https://learn.safran-navigation-timing.com/t/gnssource-2500-isyncmgr/1216/1 "2024-03-13T12:49:44Z")

</div>

Hello,  
I use a GNSSource-2500 to synchronize my receivers and have been researching how to use the device in a Linux environment and retrieve information such as GPS information and timing via the command line or Python. Using iSyncMgr\_LNR on Windows I can get this information, but on Linux there is no such thing (as far as I know).  
Any suggestions or insights would be greatly appreciated.

Thank you

Jamaleddine AMGHAR  
R&D engineer, IMT, Brest, France.

---

<div class="post-metadata">

**Author:** ![mathieu.favreau](https://avatars.discourse-cdn.com/v4/letter/m/eb8c5e/32.png) [@mathieu.favreau](https://learn.safran-navigation-timing.com/u/mathieu.favreau)\
**Post date:** [March 26, 2024, 8:45pm UTC](https://learn.safran-navigation-timing.com/t/gnssource-2500-isyncmgr/1216/2 "2024-03-26T20:45:55Z")

</div>

Hi @j_amghar,

This forum is dedicated to the Skydel simulator, I sadly don’t have any knowledge of the GNSSource-2500 and therefore can’t be of much help.

If you go to the GNSSource-2500 webpage, there’s a button **GET SUPPORT** which will allow you to open a ticket:

> **[GNSSource-2500 - Safran - Navigation & Timing](https://safran-navigation-timing.com/product/gnssource-2500/)**
>
> The GNSSource™ is a low-cost, high-performance primary GPS/GNSS rubidium reference standard in a compact 1U package. Learn more.

Best,  
Mathieu